| 透水性沥青路面施工质量控制要点如下。 |
| 添加时间：2018/3/24 15:01:52 浏览次数： |
| 透水性沥青路面施工质量控制要点如下。 The main points of the quality control of the permeable asphalt pavement are as follows. （1）成立以项目经理、技术总工程师为主要负责人的质量控制小组，统一管理，全面控制石料破碎、改性沥青制备，以及混合料的拌和、摊铺、碾压等每一道工序，严格控制施工温度。 (1) set up a quality control team which is mainly responsible for the project manager and chief engineer, unified management, comprehensively control every process of stone crushing, modified asphalt preparation, mixing, paving, rolling and so on, and strictly control construction temperature. （2）严格遵循《改性沥青路面施工技术规程》，严格遵守施工工艺，保证每道工艺的施工质量满足要求。 (2) strictly follow the "technical specification for modified asphalt pavement construction", strictly abide by the construction technology, and ensure that the construction quality of each process meets the requirements. （3）严格按照技术规范进行抽样试验检测，复检合格后方可进入下一道工序，保证施工总体质量。 (3) in strict accordance with the technical specifications for sampling test, after the reinspection is qualified, the next procedure can be entered to ensure the overall quality of the construction. （4）每日施工前按照《公路路基路面现场测试规程》（JTG E60—2008）检测矿料级配、沥青含量、空隙率、压实度等，如实记录并反馈，确保路面满足《沥青路面施工及验收规范》（GB 50092—1996）要求。 (4) a day before construction in accordance with the "subgrade pavement field test procedures" (JTG E60 2008) detection of aggregate gradation, asphalt content, void ratio, degree of compaction, truthfully record and feedback, ensure the pavement to meet the "code for construction and acceptance of asphalt pavement" (GB 50092 - 1996) requirements. |
| 上一页 卓越的透水沥青高粘剂 |
| 下一页 沥青路面再生养护剂使用方法 |
Copyright © 技术支持：遨游网络